Metric Socket Sizes - Is 10mm The Same As 3 8?

Metric socket sizes

A 10mm thread has an outside diameter of 10mm. A 3/8 inch British Standard Pipe (BSP) thread has an outside diameter of 16.662mm, or a little less than 2/3 inch.

What is a 5/8 socket in MM?

Standard SAE US Wrench/Spanner Size (inches)	Metric Wrench/Spanner Size (mm)
5/8	15.88
	16
21/32	16.67
	17

What is equivalent to 22mm socket?

BOLT DIAMETER	STANDARD	METRIC
-	7/8"	22mm
5/8"	15/16"	24mm
-	1"	25mm
3/4"	1-1/8"	29mm

Is there a 16 metric wrench?

World famous Park Tool quality wrapped up in a combination metric wrench. Features an open end and a 12-point box end with a 72 tooth, two-way ratcheting mechanism.

Is 7/8 the same as 22mm?

It's 22mm since the studs are metric (14x1. 5). HOWEVER, you can use either and be fine as 7/8 is ever so slightly larger than 22mm. The way sockets and wrenches are made inexactly (for lack of a better term), 7/8 socket will fit 22mm and vice-versa.

What are the standard SAE socket sizes?

Metric and Standard (SAE) sockets come in three available drive sizes: 1/4 inch, 3/8 inch, and 1/2 inch. The measurement refers to the size of the square used to attach the to socket to a wrench or a ratchet.

Can I use a 3/4 socket instead of a 19mm?

No, there's no need to get a 19mm socket, and it will present no difference in performance just because the number on the side is different.

What's the difference between metric and imperial sockets?

If it's got numbers on the head then it's metric and the higher the number, the stronger the bolt. Another notable difference is that metric fasteners are coarser than their imperial counterparts. These are important points to be aware of if you come across an unfamiliar or unidentified fixture or fitting.

What does 7/8 convert to in MM?

Dimensions — Inches to Metric
0.875”	7/8”	22.23 mm
0.938”	15/16”	23.83 mm
1”	1”	2.54 cm
2”	2”	5.08 cm

Is SAE imperial or metric?

There are two different methods for measuring the hex sizes of sockets. The SAE (Society of Automotive Engineers) system uses inches, and the imperial or metric system uses millimeters.

What does SAE stand for measurement?

Today, measuring in feet and inches is part of the Standard American English (SAE) or Imperial units of measurement, along with volumes like gallons and fluid ounces and weights like pounds. It's standard in the United States and two other countries in the world.

Is 21mm the same as 13 16?

Indeed. A 13/16 is just under 21mm.

Are 3/4 and 19mm the same?

19mm = 3/4 inch. 20mm = 25/32 inch. 21mm = just over 13/16 inch. 22mm = almost 7/8 inch.

What is the equivalent metric unit of 10 mm?

10 millimeters (mm) =	1 centimeter (cm)
10 decimeters =	1 meter (m)	= 1,000 millimeters
10 meters =	1 dekameter (dam)
10 dekameters =	1 hectometer (hm)	= 100 meters
10 hectometers =	1 kilometer (km)	= 1,000 meters

Do they make a 20mm socket?

Kobalt Metric 1/2-in Drive 20mm 6-Point Impact Socket in the Impact Sockets & Impact Socket Sets department at Lowes.com.

Are most cars metric or standard?

Today, most of the domestic cars prefer using Metric bolts over the SAE inch sized bolts. Your new car must be a joint of Metric bolts and not the standard SAE bolts. This article's focus is to provide you an easy guide to recognize your bolts. Why The Need When All Of Them Are The Same?

Why is there no 16mm wrench?

16mm and 18mm nuts / bolts are most commonly found on American vehicles that converted to metric hardware, and not import vehicles designed with metric hardware. So, you don't find them in most basic wrench / socket sets.

What is the same as 10mm?

In standard size 10mm is equal to 1cm but in standard size sockets you don't use the CM equivalent, they are sized in MM.

What size socket fits an M10 bolt?

Metric Fasteners - Wrench size needed for Driving common Nuts
Screw Size	Wrench Size *	Alt Size, Acorn ***
M6	10mm	10mm
M8	13mm	13mm
M10	17mm	16mm

Does SAE mean standard?

SAE, or standard, is used on most domestic models, while metric applies to foreign or non-domestic vehicles. Socket sets and wrench sets are among the most used tools in cases where size measuring differences are important. Notably, SAE tools are measured in fractions of inches, from 5/32 to 2 ½ inches.

7 Metric socket sizes Images

Image result for STANDARD SOCKET SIZES Table dimensions Sockets

Craftsman 6Piece Metric 12Point Deep Socket Set 38Inch Drive

Socket 6point 14 profile Hexagonal metric size 13mm socket type

What socket sizes are available

How to Convert Standard Socket Sizes to Metric Hunker

Metric Socket Set Screw Assortment KL Jack

14 In Drive 12 Pt Metric Standard Socket Set 10 Piece