Refinishing Hardwood Floors Without Sanding - How Does Sandless Floor Refinishing Work?

Sandless refinishing, as the name implies, involves no sanding. Instead, a technician uses a machine with abrasive pads and a liquid solution to remove surface debris from the floor. The floor is lightly scuffed as the liquid etches away debris. Because no sanding is done, very little, if any, dust is produced.

What is dustless sanding?

Dustless sanding is a sanding process that eliminates 99.8% of dust produced when sanding hardwood floors. The process eliminates the dangers and tedious processes associated with sanding hardwood flooring.

How much should I pay to have my wood floors refinished?

Flooring pros usually charge $3 to $8 per square foot, so a single bedroom could cost $300 to $800, while a whole home will range from $2,400 to $6,000. These costs vary based on the following factors: Size: The more square footage that needs refinishing, the more it will cost.

How long after polyurethane can you walk on floors?

Thus, it's best to wait until all coats have been applied and dried before walking through the room. After that final coat, your floors should be off-limits for 24 hours.

How long does hardwood floor finish last?

How long will my new finish last? On average, a hardwood flooring finish lasts approximately ten years. But with proper care and maintenance, it can last much longer.

Can you refinish 100 year old hardwood floors?

If you followed along on the One Room Challenge, you already know that we refinished our 100 plus year-old hardwood floors ourselves. And oh what a difference it made! We went from paint-splattered hardwoods hidden under stained, rust-colored carpets

When can I put furniture on refinished hardwood floors?

Wait 48 to 72 hours after the hardwood has been refinished/ finished before "PLACING" furniture back in its place. Keep a steady temperature and humidity within your home. Dramatic swings in temperature will cause hardwood to shrink or to cup.

How much does it cost to put hardwood floors in a 12x12 room?

The national average cost to install hardwood flooring is $6 to $12 per square foot for both labor and material fees. For higher-end wood and larger spaces, like if you're redoing your entire first floor in hardwood, you may pay more—possibly between $13 and $25 per square foot.

Is it cheaper to refinish or replace hardwood floors?

Generally speaking, it is almost always less expensive to refinish your hardwood floors than to replace them. That's because replacing them involves paying for additional wood, the installation itself, as well as labor costs for tearing up and hauling away the existing hardwood.

What is the main disadvantage of using water based polyurethane?

Cons of Water-Based Polyurethane Expensive cost. Requires more coats. Scratches easier due to it hardness.

How can I make my hardwood floors look new again?

And wring out the microfiber applicator pad with water start spreading wood floor restorer to a

Should I paint or refinish floors first?

Most people think that painting should be done first to prevent any spills from marring brand-new flooring. However, experts agree that new flooring should always be installed before you have any interior painting done.

Can you refinish wood floors without sanding?

You can perform a spot test on a small taped-off area of your floor. Rub the area with a sand screen and apply a coat of polyurethane. Check your floor after 24 hours—if the hardwood has no residue, you can continue to refinish without sanding.

Does refinishing hardwood floors increase home value?

5. Flooring – Replacing outdated carpet or flooring, or simply refinishing wood floors that have seen better days, will definitely increase the value of your home, with a 102% return on investment.

What product does Mr Sandless use?

What exactly does Mr. Sandless Do? We use a specialized high speed floor machine, an assortment of different abrasive pads, and a non-toxic wet solution to prepare your floor for finishing. Anything that comes off of the floor stays contained in the solution!

How do I make my hardwood floors look new without refinishing?

To make hardwood floors look like new without refinishing:

1. Try buffing and polishing with a commercial-grade buffer.
2. Use a hardwood floor polishing sealant.
3. Clean markers with toothpaste and a clean cloth.
4. Apply a wood floor cleaner or oil soap for a high-gloss clean.

Do you need to remove baseboards to refinish hardwood floors?

As a general rule, we recommend leaving your base and shoe on when having your floors refinished, especially if it is painted. Depending on how the painters prepped your base, you can actually cause more damage to the base and walls by removing it.

What color hardwood floor is best for resale?

Dark stained hardwood flooring is by far the best selection when it comes to overall popularity and resale value. Some of the best darks stains for wood are espresso, dark walnut, and antique brown. These darker colors often give way to more color combinations since they do not lean towards a yellow or orange tint.

What's the best finish for hardwood floors?

These Are the 8 Best Finishing Options for Hardwood Floors

1. Water-Based Polyurethane.
2. Oil-Based Polyurethane.
3. Wax.
4. Shellac.
5. Moisture-Cure Urethane.
6. Acid-Cured Finish.
7. Penetrating Oil Sealer.
8. Aluminum Oxide.

What is the difference between refinishing and resurfacing wood floors?

Unlike refinishing hardwood floors, where the old boards are stripped, sanded, and re-finished, hardwood floor resurfacing can be done with a single pass of the sanding machine. The sanding process removes the top layers of wood, revealing the fresh wood below. Then a finish is applied to protect the wood.