Professional Soldering Station - Who Owns Weller Soldering?

Weller is the premier soldering brand from Apex Tool Group, one of the largest hand tool manufacturers in the world. Since 1952, Weller has stood for innovations in soldering and today the company continues leading the way with application solutions to complex electronics manufacturing challenges.

Why does my solder not stick?

This issue is usually caused by the soldering iron being set to an improper temperature, or the iron itself has a wattage that is too low for the solder size you are using. If you notice your solder isn't sticking, check your solder material and compare it to the wattage of your soldering iron.

Why is tinning a soldering iron important?

Tinning Your Tips Tinning stops your tips from oxidizing by creating a protective layer between the air and the iron. It's essential to keep your tip tinned, since iron oxidizes rapidly. Oxidation prevents the tip from transferring heat efficiently. Preventing oxidation through tinning extends the life of your tips.

What metal Cannot be soldered?

Solderability	Metal
Fair	Carbon steel Low alloy steel Zinc Nickel
Poor	Aluminium Aluminium bronze
Difficult	High alloy steel Stainless steels
Very Difficult	Cast iron Chromium Titanium Tantalum Magnesium

How do I choose a soldering station?

A good soldering station should be ESD-safe and give accurate temperature control. Design should be ergonomic to avoid fatigue during hand soldering. It should also have a wide selection of soldering tips.

What's the difference between a soldering iron and a soldering gun?

Soldering Guns VS Soldering Irons Conveniently operated with a trigger using one hand, a soldering gun is shaped like a pistol and is used for joining metal surfaces. A soldering iron, which is also used for joining two pieces of metal, is wand-shaped and utilizes a heated metal tip.

Which is the best soldering iron company?

The Best Soldering Irons

• Our pick. X-Tronic Model 3020-XTS LED Soldering Station. The best soldering iron.
• Upgrade pick. Hakko FX-888D. If you solder frequently.
• Budget pick. Vastar Full Set 60W 110V Soldering Iron Kit. Lots of accessories at a low price.
• Also great. Hakko FH-300. If you need a stand.

When should you replace soldering tips?

Soldering Iron tips do not last forever. Eventually they wear out. Common signs that the tip needs replacing are: a hollow forming in the end of the tip, cleaning and re-tinning has no effect, or needs frequent repeating.

Can I use Vaseline as flux?

Can You Use Vaseline as Flux? Yes, Vaseline works just as well as commercial flux, and you can even buy a generic brand. Petroleum jelly is primarily made from waxes and mineral oils so that it won't corrode your components. Plus, it cleans away the gunk and eliminates metal oxides that could compromise your bond.

Is Hakko better than Weller?

What does matter is the heat-up time. The Hakko gets up to temperature about 30% faster. In testing, the Hakko experiences less of a temperature drop after soldering or cleaning the tip, as well as having a faster recovery time. The Weller's performance is respectable, but the Hakko does even better.

Are expensive soldering irons worth it?

Functionally, there is very little difference between a $15 and $80 soldering iron; they work well enough for small jobs (buy a nice iron if you plan on doing a lot of soldering work). An inexpensive fine-tip soldering iron can do fine-pitch work; the tip is generally the limiting factor (cheap tips wear quickly).

Where is Hakko made?

About US | HAKKO CORPORATION as a Pioneer for Processing Resin Hose; High Quality, Made in Japan.

Is soldering difficult?

A good soldering technique is not hard, and it's in fact incredibly easy. It doesn't take years and years of practice to master the art of soldering. You just need the right tools and know very simple techniques. A good quality soldering is a piece of cake and anyone can master it within few attempts.

What is called tinning in soldering?

Tinning is the process of thinly coating sheets of wrought iron or steel with tin, and the resulting product is known as tinplate. The term is also widely used for the different process of coating a metal with solder before soldering.

What size soldering gun do I need?

A good soldering iron would hold a rating between 20 and 50 watts. This is great for irons as it makes them controllable. But for Soldering guns, the rating is higher. It falls somewhere between 200 watts and 260 watts.

What is the best soldering station to buy?

Best Soldering Stations Reviews

• YIHUA 862BD+ SMD ESD Safe 2 in 1 Soldering Iron Station.
• TXINLEI 8586 110V Soldering Iron Station.
• Vastar Soldering Iron Station.
• Aoyue 469 Variable Power 60 Watt Soldering Station.
• IHUA 939D+ Digital Soldering Station.
• TOAUTO Soldering Station.
• MYPOUOS Digital Soldering Station.

Why is my soldering iron not melting solder?

Solder has a very low melting point (compared to other metals/alloys). Even a weak 40W iron should melt it almost instantly. If it's not melting the solder, then the iron is not hot enough or even working. Try poking the tip through a piece of paper.

How many watts is a good soldering iron?

So what is the best amount of wattage to have for your soldering iron? I would say that if you are an average user, try to go for no more than 45 watts. If you are a solderer that has a bit more experience, then you can go for about 60 watts.

What soldering iron Do professionals use?

Best Professional Soldering Iron—Hakko Soldering Iron With a 97% positive rating, this top tool from Hakko that knows its stuff is lightweight, ergonomic, has variable temperature control and features a ceramic heater and advanced electronic controls.

Can I use a soldering gun for electronics?

I'd never use a soldering gun. For electronics work, I strongly recommend a good soldering station with an adjustable temperature control and interchangeable tips. They're more expensive than the cheap versions you can buy in shopping malls, but they're worth every nickel.